Ten names appear under S32, and they are the names of villages rather than the names of districts.
What S32 actually covers
The coverage line reads Abney, Bretton, Calver, Curbar, Eyam, Foolow, Grindleford, Hathersage, Leam and Stoney Middleton. The post town for all of them is HOPE VALLEY. The authority is Derbyshire Dales. The ward list is Bradwell, Calver & Longstone, Chatsworth and Hathersage, and the parish list runs Abney and Abney Grange, Baslow and Bubnell, Calver, Curbar and Eyam.
Two things about that list explain the outcode better than anything else.
The first is the shape of the parish names. Abney and Abney Grange are administered as one parish, and so are Baslow and Bubnell. When two names have to be joined to make a single parish, it is because neither place is large enough to carry the arrangement on its own, and that tells you what kind of ground this is. These are parish-sized places in the old sense: a church, a handful of roads, and a scattering of houses around them, not a settlement with a numbered street pattern. Eyam, Foolow, Bretton, Leam and Abney are all villages at that scale rather than towns, and Grindleford, Hathersage, Calver, Curbar and Stoney Middleton are the larger village names on the same list.
The second is how far the ward column reaches past the coverage line. Bradwell and Chatsworth are ward names, and neither is a coverage name; Calver and Longstone are joined into a single ward, and Longstone is not a coverage name either. So an S32 address can be in a ward whose name never appears in the coverage list, exactly as the parish list names ground the coverage line skipped. Between the wards, the parishes and the coverage names, the outcode covers a stretch of the Hope Valley and the country around it, and it is nowhere near a city.
The built form follows. In a place like Hathersage or Grindleford there is a village core where houses sit close to the road, and outside it the properties thin out. In the smaller places the pattern differs from the outset: a property may be known by a name rather than a number, reached by its own track rather than a street, sitting on a lane with no kerb or pavement, with the next property a field away. Some of the ground between the villages is farmland with scattered houses on it, and some of it is hillside. This is Peak District ground, and it behaves like it.
Why the doorstep question barely applies in S32
In a city outcode the argument about a doorstep is about who is in, what the building looks like, and whether there is somewhere safe to leave a parcel. In S32 the argument arrives later than that, because the first question is how a carrier gets to the property at all.
Start with the address. A named house at the end of its own access is not an address a stranger can read off a list and follow. A number on a street is unambiguous; a name and a lane is something a carrier has to interpret, and that is exactly where a doorstep attempt tends to fail. That is true whether the house is in Eyam, Curbar or Foolow, and it is truer the further the property sits from a village core.
Then take the falling-back position, which is what a doorstep model actually relies on when nobody answers. In a town, a failed door can sometimes be left with a neighbour, in a shared porch, or inside a communal entrance. None of those exists in most of S32. There is no neighbour within knocking distance, there is no shared entrance, and there is no sheltered corner by the door that faces away from the lane. What is left is a parcel by a door on open ground, in the open air, in a place where the lane it faces may only be walked twice a day.
Then there is the assumption about who is in, and it fails the same way it fails everywhere else: the villages empty during the working day. It fails harder here in one respect, because the person who is out is out for a longer proportion of the day when the nearest town is a drive away.
The locker that works for S32
The useful question in S32 is not whether a cabinet beats a doorstep. It is which cabinet you can actually reach, because in a valley outcode that is a narrower question than it is in a city.
Give the full postcode at checkout and what comes back is generated from the address, which is what makes the answer trustworthy in a place like this: Abney, Leam and Bretton are separate on the ground and they can return different points, so the settlement name does not settle anything and the postcode does. Read the list before you commit, and pick the point that sits on a route you already travel rather than the one that is shortest on a map. A cabinet in a village you drive through weekly is a better choice than one that measures nearer but sits on a road you never use.
What you choose is the cabinet, not a slot, so there is no appointment to keep and nobody has to be at the house. The parcel goes into a compartment reserved under your name and stays put; the opening code reaches your phone as the parcel lands, and seventy-two hours is what you have from arrival. Three days covers a normal week for most addresses here. If your first choice of point turns out to be awkward from where you are, changing it before you pay is the easy moment to do it.
Where the week goes for an S32 order
The distance out to the valley is not part of the sequence, because the parcel is not being driven to your lane. The order is confirmed online, packed, and released inside a day of it being placed, and the weekend counts like any other day for that handover.
From there it goes into the InPost network and moves from point to point, not to a house, and the cabinet you named normally receives it three or four working days on. Tracking moves with the parcel once it is on its way, so the position of the order is something you look at rather than ring about.
That begins a seventy-two hour window that runs from arrival, which is the whole of the time the compartment is reserved. Where a point is only convenient on certain days, move it while the order is still open rather than once the parcel is in it.
The charge is £5 for the order, applied once whatever the basket holds, and there is no floor under the order value.
S32 questions we actually get
My address is Eyam, but the post town reads Hope Valley. What should the order carry?
The address as it is normally written, with the full postcode. HOPE VALLEY is the post town for the whole outcode, which means a household in Eyam, Foolow or Calver all write the same one, and it is a postal label rather than a description of which village you are in. What it will not tell you is which points serve your address, because the list comes from the postcode and villages a mile apart can return different cabinets. Write the address properly, then work from the list that comes back rather than from the post town.
Calver and Curbar are right next to one another. Same collection point or two?
Not something either of us should assume. Both are coverage names inside S32, and both have their own parish, and while neighbours of that size often end up served by the same point, the serving list is generated per postcode rather than per village. Two addresses in the same lane can return different options, and two in different villages can return the same one. Put the full postcode in and read what comes back; if nothing the list offers is workable from where you are, tell us the address and we will confirm the points before you order rather than after.
If you are working out the practical side, the Sheffield ordering guide walks the steps and the age check, while the Sheffield delivery and locker collection guide answers the timing and collection questions.



