24h dispatch · Mon–SatTracking number in 5 minutesLocker 2–4 days · Royal Mail to door 1–2 days27,500+ InPost points · collect 24/7Locker £5 · Door £10 · free over £75 (£120 door)Pay by card, bank or crypto
Tips31 Aug 20265 min readGreen Hub 420

How to Read a Cannabis Label: A Buyer's Guide

Learn how to decode the numbers, terms and lab results on a cannabis label so you can shop with confidence.

What a Label Should Tell You

A good label is a safety document first and a marketing tool second. Check the basics: product name, net weight, strain or cultivar name, and total THC and CBD percentages. A legitimate label also carries a batch or lot number, a harvest or packaging date, storage guidance, an 21+ restriction and a keep-away-from-children warning. If several of these are missing, treat that as your first red flag.

Reading Lab Test Results

Third-party testing separates a product you can verify from one you simply have to trust. Look for a certificate of analysis (COA) linked to the batch number on the packaging. A useful report covers the full cannabinoid profile, terpene content, and screening for contaminants such as pesticides, heavy metals, mould and residual solvents. Check that it comes from an independent laboratory, not the brand itself.

Understanding Potency

Potency is usually expressed as a percentage by weight. THC percentage tells you how much tetrahydrocannabinol the product contains, while CBD indicates the non-intoxicating compound. Note the difference between "total THC" and "delta-9 THC": total THC includes precursors that convert when heated, giving a fuller picture. Percentages are not the whole story — the same figure can feel very different depending on the terpene profile and your tolerance. If you are new, start low and go slow.

Common Label Terms

Indica, sativa and hybrid describe growth characteristics and traditional effects, though modern breeding blurs these lines. Terpenes are the aromatic compounds behind smell and flavour, and many labels list the dominant ones. "Full-spectrum" means the extract keeps a broad range of the plant's natural compounds, while "distillate" or "isolate" refers to more refined extracts.

Red Flags to Avoid

  • No batch number or no COA available.
  • Lab results hosted by the brand with no independent verification.
  • Health or medical claims — no compliant label should promise to treat or cure anything.
  • Illegible printing, missing warnings, or a missing 21+ restriction.
  • Potency figures that seem implausibly high without supporting data.

If a label fails any of these checks, put the product back.

Every Field on a Label, Explained

FieldWhat it tells youWhat good looks like
Product and cultivar nameWhat you are actually buyingA specific cultivar, not a vague category
Net weightHow much product is in the packStated in grams and matching your order
Total THCConcentration of the intoxicating compoundOne clear figure that includes THCA
Total CBDConcentration of the non-intoxicating compoundReported separately and tested, not estimated
THCA and delta-9 THCRaw versus activated THCBoth listed, so "total" can be checked
Terpene profileThe compounds behind aroma and flavourDominant terpenes named, ideally with figures
Batch or lot numberThe exact production runA unique code that ties back to test results
Harvest and packaging datesFreshnessBoth present and reasonably recent

Batch Numbers Tie Everything Together

The batch or lot number is the thread that connects the pack in your hand to the figures printed beside it. Potency claims, terpene data, harvest dates and contaminant testing all belong to one production run, and that run has a code. Without it, a percentage on a label is generic marketing copy that could apply to any harvest the producer has ever handled.

How to Verify a Certificate of Analysis Yourself

  1. Find the batch or lot number printed on the packaging.
  2. Locate the matching report — usually through a code, QR mark or link on the label, or by asking the seller directly.
  3. Check that the laboratory named on the report is independent of the producer and properly identified.
  4. Confirm the batch number on the report matches the pack exactly, digit for digit.
  5. Compare the test date with the packaging date; a report from long before packing tells you less about what you now hold.
  6. Read the contaminant panel, not just the potency line — pesticides, heavy metals, mould and residual solvents.
  7. Check whether "total THC" accounts for THCA, or reports delta-9 THC alone.

If any step fails, the label's numbers are unverified claims rather than tested results.

Labels on Edibles, Vapes and Extracts

The same principle applies in different formats, with different numbers to watch.

  • Edibles: look for milligrams per portion, the number of portions per pack, and the total for the whole pack. The total is the figure that catches people out.
  • Vapes: check the volume of the cartridge, the concentration stated, and any information about the carrier or base.
  • Extracts and concentrates: look at the format, the consistency, and whether the product is described as solventless or solvent-extracted.

Heat and light degrade these formats faster than flower — see how to store weed.

Further Reading

  • UK government guidance on controlled substances and the law.
  • Independent laboratory guides to reading certificates of analysis.
  • Educational resources on terpenes and the entourage effect.
  • UK cannabis law — the legal position on THC products in the UK.
  • THC vs CBD — how the two main compounds differ.

Frequently Asked Questions

What does the THC percentage actually mean? It indicates the concentration of tetrahydrocannabinol by weight — a rough sense of potency, though effects vary.

Should I trust the lab result printed on the packaging? Only if it matches a verifiable COA from an independent laboratory linked to the same batch number.

Are higher percentages always stronger? Not necessarily. Terpenes, freshness and your tolerance all influence the experience.

Why do some labels list both THC and THCA? THCA is the acidic precursor that converts into THC when heated; total THC accounts for both.

Can a label give a potency range instead of one figure? Yes, and it is common, because natural variation exists between plants in one batch. What matters is that the range is tied to test results for that batch.

What should I do if the label is missing key information? Ask the seller for the batch number and the matching certificate of analysis, and check the response carefully. A specific reply with a matching report is useful; a vague reply or silence is itself an answer, and the safest reading is that the numbers cannot be verified.

All information on this page is provided for research and collection purposes only and is intended for readers aged 21 and over.

#cannabis label#lab testing#potency#buyers guide#education
In stock now

Popular strains with UK locker delivery

Related guides

Ordering from the UK

Dispatch is inside 24 hours, weekends included, and orders go out to InPost lockers across England, Wales and Scotland — or by Royal Mail Tracked 24 to your door anywhere in the UK, Northern Ireland included. Delivery is £5 to an InPost locker (England, Wales and Scotland) or £10 by Royal Mail to your door anywhere in the UK, free over £75 by locker or £120 by Royal Mail; there is no minimum order.

Explore by strain

Every strain we stock has its own guide covering lineage, dominant terpenes, THC range and what it is usually chosen for — written from the same product data we ship against.

Related guides

Ready to order?

Browse the full range and get secure delivery to your nearest InPost locker.

Full timings and locker coverage in our weed delivery UK guide.